When Uneven Color Issues Occur With White Ink; Damper Cleaning Method - Roland TrueVIS VG2-640 User Manual

When Uneven Color Issues Occur with White Ink

Damper Cleaning Method

If uneven color issues with white ink are not resolved even after shaking the pouch trays to mix the ink, perform
"damper cleaning." Uneven colors refers to the symptom of printed colors being uneven (such as the color density
being inconsistent) even when the same data is printed with the same settings.
Damper cleaning can be used to stabilize the printed colors by agitating the ink.
IMPORTANT
• Damper cleaning consumes a lot of ink, and overly frequent use may damage the print heads themselves. Avoid performing this
operation more than necessary.
• When you perform damper cleaning, replace the LcLmLkW ink with a new ink pouch. If the ink runs out during cleaning, a "CLEAN-
ING ERROR" will occur and cleaning will stop.
P. 303「CLEANING ERROR」
• The ink pouch that you have removed can still be used in operations other than damper cleaning (such as printing).
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
3.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
INK CONTROL
4.
Press [▶] once, and then press [▼] several times to display the screen shown below.
INK CONTORL
DAMPER CL.
5.
Press [ENTER].
The screen shown below appears. The ink slot whose LED is flashing is the target for ink replacement.
CHANGE TO NEW
INK CARTRIDGE
6.
Replace the LcLmLkW ink with a new ink pouch.
IMPORTANT
Replace only the LcLmLkW ink with a new ink pouch. There is no need to replace the other colors of ink.
P. 56「Ink Pouch Replacement」
7.
Press [ENTER].
The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the proce-
dure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute and 45 sec-
onds")
3. Advanced Maintenance
245