Is The Temperature Of The Room Too Low; Is The Print Mode Suitable; Is The Media Loaded Correctly; Are The Settings For The [Preset] Menu Item Appropriate - Roland TrueVIS VG2-640 User Manual

Printed Results Are Coarse or Contain Horizontal Stripes

Is the temperature of the room too low?

The media heating system may not warm up sufficiently when the ambient temperature is less than 20°C (68°F).
Also, even when the media heating system reaches its set temperatures, adequate effectiveness may not be appa-
rent if the media is thoroughly chilled. Before printing, allow the media to come to room temperature.

Is the print mode suitable?

If attractive printing is impossible even when the media heating system is at a high temperature, try using a high-
er-quality print mode. Depending on the media, smudging may occur when using a high-quality print mode, and
results may also vary greatly depending on the settings of your software RIP (such as the color-profile selection).
Select settings appropriate for the media you are using.

Is the media loaded correctly?

If the media is not loaded correctly or the media feed is not smooth, printing may be adversely affected. Load the
media correctly.
RELATED LINKS
・ P. 30 "Setup of Roll Media"
・ P. 40 "Setup of Sheet Media"

Are the settings for the [PRESET] menu item appropriate?

If the settings selected with the [PRESET] menu item are not suitable for the type of media, printing may be ad-
versely affected. Choose settings optimized for the media you are using.
RELATED LINKS
・ P. 190 "Using Presets"
274
1. Output Quality Problems