Printing And Cutting Output; Step 1: Batch Settings For Printing And Cutting - Roland TrueVIS VG2-640 User Manual

Printing and Cutting Output

Step 1: Batch Settings for Printing and Cutting

To ensure the optimal output according to the media size and type, you can configure various settings on this ma-
chine. However, it is hard work to configure these settings one at a time. You can use the "MEDIA SETTING" menu
to configure the absolute minimum of necessary items as a batch. You can save the setting details as a preset.
Note that you can set all the items set here individually as well.
1.
Start the "MEDIA SETTING" menu.
Procedure
1.
Load the media.
Check that the media is not sagging. If any sagging exists, settings such as the correction values will not
function effectively.
2.
Press [MENU].
3.
Press [ENTER].
MENU
MEDIA SETTING
If you want to cancel the batch settings before they are completed, see the following page.
RELATED LINKS
・ P. 73 "Canceling Batch Settings before They Are Completed"
3. Printing and Cutting Method
95