Roland TrueVIS VG2-640 User Manual page 176

5.
Press [FUNCTION], then [▶] to display the screen shown below.
BASE POINT
ALIGN POINT 1
6.
Press [ENTER].
The [ALIGN POINT] is set. The characters "B1" are displayed on the screen.
W1100mm
B1
7.
Repeat steps 4 through 6 to specify "align point 2" and "align point 3" as required.
The number of the align point you are setting is determined automatically.
Accurately Adjusting the Settings for Cutting with Crop Marks
1. Optimizing the Output Quality
175