Roland TrueVIS VG2-640 User Manual page 40

MEMO
Press down on the bent part of the media clamps to lift up both of their edges. Move the media clamps to the left and right
with both edges lifted up.
7.
Close the front cover.
The "PRESS ENTER TO PERFORM SETUP" message is displayed on the screen.
8.
Press [ENTER].
When you press [ENTER], the cutting carriage moves and detects the width of the media. This operation is
called initialization. When initialization ends, [SETUP] on the operation panel lights, and the printable width
is displayed on the screen. This completes the setup of the media.
IMPORTANT
Remove when not using roll media.
Do not leave roll media loaded on the machine for a long period of time. Be sure to remove and store the media when not in
use. Leaving the roll media loaded on the machine for a long period of time will cause the media to sag, which may deteriorate
the printing quality and may also lead to motor errors.
Setup of Media
39
2. Basic Operations