Roland TrueVIS VG2-640 User Manual page 129

Cutting with Crop Marks
9.
Save the settings as a preset.
Procedure
1.
Press [◀] to select "SAVE".
PRESET
[SAVE]
2.
Press [ENTER] to confirm your entry.
If you select "NEXT" and press [ENTER], the screen in step 7 is displayed, and the settings you have selected
up to this point are not saved as a preset. However, they will remain as the current setting values for the
machine.
3.
Press [▲] or [▼] to select a destination to save the preset.
You can select a name from NAME1 to NAME8.
SAVE TO
NAME1
4.
Press [ENTER] to confirm your entry.
5.
Set the name.
(1)
Press [▲] or [▼] to select a character.
(2)
Press [▶] to move to the next character.
(3)
Set the following characters in the same way.
You can enter up to15 characters.
SET NAME
6.
Press [ENTER] to confirm your entry.
7.
Press [MENU] to go back to the original screen.
COMPLETED
This completes the operation of the "MEDIA SETTING" menu.
128
4. How to Cut with Crop Marks
NEXT