Conditions For Usable Media - Roland TrueVIS VG2-640 User Manual

About the Media Used

Conditions for Usable Media

This machine cannot print on every kind of media. When selecting media, be sure to carry out testing in advance
to make sure that satisfactory printing results are obtained.
Size
*1
Width
*1
Cuttable media thickness
Maximum media thickness (including backing
*1
paper)
Maximum roll outer diameter
Paper tube (core) inner diameter
*1 Applies to both roll and sheet media
*2 To use 2-inch media, the optional media flanges are required. For information about optional items, contact your author-
ized Roland DG Corporation dealer or visit our website (http://www.rolanddg.com/).
Maximum Roll Weight
• 64-inch model: 40 kg (88 lb.)
• 54-inch model: 30 kg (66 lb.)
If using the take-up unit, this specification depends on the conditions of the take-up unit.
Other Conditions
Media such as the following cannot be used.
• Media whose end is attached to the paper tube (core)
• Media that is severely warped or that has a strong tendency to reroll
• Media that cannot withstand the heat of the media heating system
• Media whose paper tube (core) is bent or crushed
• Media that bends under its own weight when loaded
• Media on a sagging roll
• Media that is rolled unevenly
18
1. Basic Information
64-inch model
315 to 1,625 mm
(12.4 to 64 in.)
0.08 to 0.22 mm (3.2 to 8.6 mil; depends on the material of the media)
When performing printing only: 1.0 mm
When performing cutting: 0.4 mm (15 mil)
210 mm (8.2 in.)
76.2 mm (3 in.) or 50.8 mm (2 in.)
54-inch model
275 to 1,371 mm
(10.8 to 54 in.)
*2