Replacing Parts For Maintenance; Replacing The Wiper And The Tray Pad - Roland TrueVIS VG2-640 User Manual

Replacing Parts for Maintenance

Replacing the Wiper and the Tray Pad

The wipers and the tray pads are components that are used for cleaning the print heads.
When the following screen is displayed, it is time to replace the wiper.
TIME FOR
WIPER REPLACE
For information about purchasing wipers or tray pads, contact your authorized Roland DG Corporation dealer or
visit our website (http://www.rolanddg.com/).
CAUTION
Procedure
1.
Press [ENTER] when the following screen appears.
TIME FOR
WIPER REPLACE
2.
Remove any media.
3.
Press [MENU].
4.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
5.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
MAINTENANCE
6.
Press [▶] to display the screen shown below.
MAINTENANCE
REPLACE WIPER
7.
Press [ENTER].
The cutting carriage moves to a location where wiper replacement is possible, and then the screen shown
below appears.
OPEN COVER R
8.
Open the right cover.
256
4. Replacing Consumable Parts
Be sure to perform operations as specified by the instructions, and never touch any area
not specified in the instructions.
Otherwise sudden movement of the machine may cause injury.
Wipers
Required items
Tray pad Tweezers