Turning The Power Off - Roland TrueVIS VG2-640 User Manual

Turning the Power Off

When output is not being performed, remove any loaded media or switch off the sub
WARNING
power.
The continued application of heat at a single location may cause the release of toxic gases from the me-
dia or pose a fire hazard.
Procedure
1.
Switch off the sub power whenever printing is finished.
Hold down the sub power switch for one second or longer.
2.
Raise the loading lever and remove the media.
When not using the machine, raise the loading lever even if the sub power is on.
Power Supply Operations
2. Basic Operations
27