Cleaning The Wiper Tray - Roland TrueVIS VG2-640 User Manual

Cleaning the Wiper Tray

Discharged fluid collects in the wiper tray. The wiper tray must be cleaned periodically.
If the following message is displayed, clean the wiper tray, and then replace the tray pad.
Be sure to perform operations as specified by the instructions, and never touch any area
CAUTION
not specified in the instructions.
Otherwise sudden movement of the machine may cause injury.
Procedure
1.
Press [ENTER].
2.
Press [MENU].
3.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
4.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
MAINTENANCE
5.
Press [▶] once, and then press [▼] several times to display the screen shown below.
MAINTENANCE
TRAY CLEANING
6.
Press [ENTER].
7.
When the screen shown below appears, remove the drain bottle and discard the discharged fluid.
EMPTY
DRAIN BOTTLE
IMPORTANT
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine. Exercise caution to prevent
this fluid from soiling your hands or the floor.
CAUTION
WARNING
Tray pad
Before you detach the drain bottle, be sure to wait for the screen to display "EMPTY
DRAIN BOTTLE." After discarding the discharged fluid, promptly attach the drain bot-
tle to the machine.
Failing to follow this procedure may cause discharged fluid to flow out of the tube and spill, soiling
your hands or the floor.
Never place discharged fluid or ink near an open flame.
Replacing Parts for Maintenance
Required items
4. Replacing Consumable Parts
Tweezers
259