Automatic Detection of Crop Marks Fails
Is the media wrinkled or warped?
Wrinkled or warped media may cause crop mark detection to fail. Avoid using wrinkled or warped media.
If the crop marks cannot be detected automatically, you can perform alignment manually.
RELATED LINKS
・ P. 174 "Aligning the Positions of Cutting with Crop Marks Manually"
・ P. 187 "Adjusting the Level of the Sensor for Reading Crop Marks According to the Media"
Is the media size too large?
Large media may lead to large errors, which may cause crop mark detection to fail.
When you want to use lengthy media, we recommend performing output with the data separated into sizes that
are as short as possible.
If the crop marks cannot be detected automatically, you can perform alignment manually.
RELATED LINKS
・ P. 174 "Aligning the Positions of Cutting with Crop Marks Manually"
Are you using media that is likely to reflect light?
The machine may not be able to read crop marks from media that is likely to reflect light. Try [CROPSENS CALIB.]
(the correction function of the sensor for reading crop marks). If the crop marks still cannot be read, change the
media you are using.
RELATED LINKS
・ P. 184 "Correct the sensor for reading crop marks."
Are you using transparent media?
The machine cannot read crop marks from transparent media. Change the media you are using.
2. Problems in Cutting with Crop Marks
281