Replacing The Separating Knife - Roland Texart RT-640 User Manual

Replacing Consumable Parts

Replacing the Separating Knife

If the separating knife becomes dull, replace it with the included replacement knife.
CAUTION
CAUTION
Required items
3
1.
Enter the separating knife replacement menu.

Remove any media from the platen.

Press




82
Be sure to perform operations as specified by the instructions above,
and never touch any area not specified in the instructions.
Failure to observe these precautions may cause the machine to move sud-
denly, resulting in injury.
Do not touch the edge of the separating knife.
Doing so may result in injury.
Replacement blade for separating
knife
.
Press
at left.
Press
Press
Press
at left.
Press
The print-head carriage moves to a location where knife replacement
is possible, and then the screen shown on the left appears.
Open the front cover.
Preparations are complete when this screen appears.
several times to display the screen shown
, and then press
.
several times to display the screen shown
.
twice.