Roland TrueVIS VG2-640 User Manual page 64

2.
Performing Normal Cleaning
Procedure
1.
Press [FUNCTION] to display the screen shown below.
FUNCTION
BASE POINT
2.
Press [▼], then [▶][▼] to display the screen shown below.
CLEANING
NORMAL CL.
3.
Check for the group with dot drop-out or dot displacement by viewing the results of the printing test.
The space from "A" to "B" is group A. The space from "B" to the right side is group B.
MEMO
If the printing-test results are difficult to interpret
Check the results in a bright location, changing your line of vision. It is visible using the reflection of the light.
4.
Press [▶].
5.
Select the group of print heads to clean.
(1)
Press [◀] or [▶] to select the group of print heads that is not to be cleaned.
NORMAL CL.
AB
(2)
Press [▲] or [▼] to get rid of the group display.
NORMAL CL.
A
(3)
Repeat steps 1 and 2 to display only the group of print heads that requires cleaning.
Only the displayed groups will be cleaned. If A and B are displayed, they will both be cleaned.
6.
Press [ENTER] to confirm your entry.
The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the proce-
dure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute and 45 sec-
onds")
CLEANING...
>>
When finished, the screen shown below appears again.
01:45
Preparations before Printing Output
1. Printing Method
63