Roland TrueVIS VG2-640 User Manual page 38

3.
Move the middle pinch rollers (
There are grit patterns ( ) wherever there are grit rollers.
MEMO
Place the middle pinch rollers over all the grit patterns within the media width. If you have forgotten to place the middle pinch
rollers, the media will be skewed during printing or will come loose, which will have an effect on the printing quality.
MEMO
• The middle pinch roller will not lower onto the three grit rollers from the right end. Place the middle pinch roller on a grit
roller other than these three.
• There may be extra middle pinch rollers depending on the width of the media being used. Move the extra middle pinch
rollers to positions where no grit patterns are present. Where no grit patterns are present, the middle pinch rollers will not
come down.
) over all the remaining grit rollers covered by the media (
Setup of Media
).
37
2. Basic Operations