Setup Of Media; Setup Of Roll Media - Roland TrueVIS VG2-640 User Manual

Setup of Media

Setup of Roll Media

Load the roll media on the printer. When you have finished loading the media, [SETUP] lights. This work is referred
to as "Setup of Media."
CAUTION
CAUTION
CAUTION
1.
Install the media on the media holders.
The media holder of this machine is designed to be used exclusively with media that has a paper tube (core) with
an inner diameter of 3 inches. To use 2-inch media, the optional media flanges are required. For information about
optional items, contact your authorized Roland DG Corporation dealer or visit our website (http://
www.rolanddg.com/).
Procedure
1.
Open the front cover.
2.
Move the media clamps to the outside of the grit rollers on the left and right edges respectively.
3.
Loosen the retaining screws of the media holders, and then draw them to the left and right ends respectively.
4.
Place the media on the media stays.
30
2. Basic Operations
Load the roll media correctly.
Otherwise the media may fall and cause injury.
The roll media is approximately 40 kg (88 lb.). To avoid injury, handle the roll media with
care.
Never load media that weighs over 40 kg (88 lb.). For the 54-inch model, never load me-
dia that weighs over 30 kg (66 lb.).
The machine may tip over because it is incapable of withstanding the weight. Alternatively, the media
may fall out of the machine.