Prioritizing The Cutting Settings Of This Machine Over The Software Rip Settings - Roland TrueVIS VG2-640 User Manual

Accurately Adjusting the Cutting Settings

Prioritizing the Cutting Settings of This Machine over the Software RIP Settings

Procedure
1.
Press [MENU].
2.
Press [▲] several times to display the screen shown below.
MENU
CUTTING MENU
3.
Press [▶] once, and then press [▼] several times to display the screen shown below.
CUTTING MENU
CUTTING PRIOR
4.
Press [▶] to display the screen shown below.
CUTTING PRIOR
COMMAND COMMAND
5.
Press [▲] or [▼] to select "MENU".
Prioritize the cutting conditions set on the machine over the software RIP settings.
If this is set to "COMMAND", priority is given to the software RIP settings.
CUTTING PRIOR
COMMAND MENU
6.
Press [ENTER] to confirm your entry.
7.
Press [MENU] to go back to the original screen.
MEMO
• Default setting: "COMMAND"
168
1. Optimizing the Output Quality