Roland TrueVIS VG2-640 User Manual page 98

3.
Adjust the print head height.
Procedure
1.
Press [◀] to select "CHANGE."
HEAD HGT LOW
[CHANGE] NEXT
2.
Press [ENTER] to confirm your entry.
You can select "NEXT" and press [ENTER] to skip the current menu and proceed to the next menu.
3.
When the following screen is displayed, open the front cover.
HEAD HEIGHT
LOW
4.
Move the height-adjustment lever to adjust the head height.
When you change the position of the height-adjustment lever, the display screen changes and the buzzer
sounds at the same time.
Position
HIGH
MIDDLE
LOW
MEMO
• Normally move the height-adjustment lever to "LOW." For media that is wrinkled or comes loose from the platen, move the
height-adjustment lever to "MEDIUM" or "HIGH."
• The printing quality degrades as the distance between the media and the print heads increases. Do not move the height-
adjustment lever to "MEDIUM" or "HIGH" needlessly.
5.
Close the front cover.
LOW
HEAD HEIGHT
LOW
HEAD HEIGHT
LOW
HEAD HEIGHT
LOW
Display Screen
HIGH
MIDDLE
LOW
Printing and Cutting Output
3. Printing and Cutting Method
97