Replacing The Separating Knife - Roland LEC-540 User Manual

Replacing the Separating Knife

If the separating knife becomes dull, replace it with the included replacement knife
CAUTION
CAUTION
1.

Replacing the Separating Knife.


Press .

MENU
SUB MENU

SUB MENU
MAINTENANCE

MAINTENANCE
REPLACE KNIFE
NOW PROCESSING..
OPEN FRONT
COVER

FINISHED?
2.
Replace the separating knife.

Be sure to perform operations as specified by these instructions, and
never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Never touch the tip of the blade with your fingers.
Doing so may result in injury.
Press
the left appears.
Press
Press
Press
Press
The cutting carriage moves to a location where blade replacement is
possible, and then the screen shown in the figure appears.
Open the front cover.
Preparations are complete when this screen appears.
Replacing Consumable Parts
several times until the screen shown on
and then .
.
twice.
.
Remove the separating knife.
Loosen the screw until it slips out.
Grasp the screw portion, and slowly pull
it out in the direction of the arrow. When do-
ing this, do not pull it back toward you.
4
117