Roland TrueVIS VG2-640 User Manual page 15

Part Names and Functions
No. Name
Blade protector
Platen
Apron
Wipers
Wiper tray
Serious Errors Indicated by the Print Light
If an error that may lead to serious damage to the printer occurs, the print light blinks.
This indicates one of the situations shown below.
When the print light blinks, the error also appears on the operation panel's display screen. Check the display
screen, and then respond to the error according to the information in
Display Screen
AVOIDING DRY-UP TURN POWER OFF
MOTOR ERROR: TURN POWER OFF
TEMPERATURE IS TOO LOW **°C
TEMPERATURE IS TOO HIGH **°C
CANCELED FOR PUMP PROTECTION
SERVICE CALL ****
If a Cover Opens during Operation
If the front cover, left cover, or right cover (hereinafter referred to as "cover") opens during an output operation or
while setting up the media, the machine makes an emergency stop. When an emergency stop occurs, a message
prompting you to close the cover appears on the screen. Close the covers as directed in the instructions shown on
the screen.
When the cover is closed, you will be able to continue the operation.
If you cannot continue the operation even after you close the cover, a nonrecoverable error may have occurred.
Refer to
Error Messages(P. 300)
14
1. Basic Information
for details.
Function overview
This is the path that the blade takes during cutting. It protects the
tip of the blade.
This is the path over which the media passes. A suction fan that
keeps the media from coming loose and a print heater that helps
fix the ink are built in.
This has a built-in dryer to speed up drying of the ink.
Cleans the print heads during automatic cleaning and in similar sit-
uations.
This tray houses the TR2 cleaning liquid used to clean the wiper. It
contains a tray pad.
Error Messages(P. 300)
Error overview
The print heads were about to dry out. The print heads may be dam-
aged if allowed to dry out.
An excessive load was applied to the motor. If this error is not ad-
dressed, the print heads may be damaged.
The ambient temperature in the printer's installation location has fall-
en below the temperature in which operation is possible. If this error
is not addressed, the printer may malfunction.
The ambient temperature in the printer's installation location has ris-
en above the temperature in which operation is possible. If this error
is not addressed, the printer may malfunction.
An excessive load was applied to the pump within the machine. If this
error is not addressed, the pump may malfunction.
An unrecoverable error or an error that requires a part replacement
has occurred.
in this manual.