Roland TrueVIS VG2-640 User Manual page 125

Cutting with Crop Marks
CONTINUE ADJ.?
[YES] DONE
• Two shapes are peeled off separately
Press [▶] to select "DONE".
CONTINUE ADJ.?
YES [DONE]
11.
Press [ENTER] to confirm your entry.
• If you select "YES", the test pattern is cut again. Go back to step 12 and perform the setting again.
• If you select "DONE", proceed to step
marks.(P. 125)
124
4. How to Cut with Crop Marks
.
7.Correct the misalignment of the printing and cutting positions when using crop