Replacing The Separating Knife - Roland Hi-Fi Express FP-740 User Manual

Replacing the Separating Knife

If the separating knife becomes dull, replace it with the included replacement blade.
CAUTION Be sure to perform operations as specified by these instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Do not touch the tip of the separating knife with your fingers.
CAUTION
Doing so may result in injury.
Important Notes on This Procedure
To keep the print heads from drying out, complete the operation within three minutes.
After three minutes a warning beep sounds. Complete the operation quickly, and when finished, press
1.
Enter the blade replacement mode.
MENU
SUB MENU
SUB MENU
REPLACE KNIFE
FINISHED?
2.
Replace the separating knife.
Open the front cover.
1
Positioning
groove
Press
Press
Press
Press
Press
Preparations are complete when this screen appears.
Remove the separating knife.
2
1. Loosen the screw until it slips out.
2. Grasp the screw portion, and slowly pull it out in the
direction of the arrow. When doing this, do not pull it back
toward you.
Install a new knife.
Magnet
The knife is secured in place by the magnet.
3-4 Replacing Consumable Parts
.
several times.
.
several times.
.
Chapter 3 Maintenance and Adjustment
.
63