Making Sure To Verify The Setting For The Amount Remaining Every Time The Media Is Changed - Roland TrueVIS VG2-640 User Manual

Managing the Operations Appropriately and Efficiently
Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is
Changed
Set the machine to display the amount of media remaining every time the media is changed.
Setting this menu item to "ENABLE" can keep you from forgetting to redo the setting when you change the media.
However, be sure to also set the [EDGE DETECTION] menu item to "ENABLE" (
[EDGE DETECTION] is set to "DISABLE", [SHEET REMAIN] is not displayed automatically.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SHEET REMAIN
3.
Press [▶], then [▲] to display the screen shown below.
SHEET REMAIN
AUTO DISPLAY
4.
Press [▶] to display the screen shown below.
AUTO DISPLAY
DISABLE DISABLE
5.
Press [▲] or [▼] to select "ENABLE".
AUTO DISPLAY
DISABLE ENABLE
6.
Press [ENTER] to confirm your entry.
If you select "ENABLE", you must set the [EDGE DETECTION] menu to "ENABLE".
7.
Press [MENU] to go back to the original screen.
MEMO
• Default setting: "DISABLE"
RELATED LINKS
・ P. 146 "Using Transparent Media"
208
3. Optimizing Operation Management
Using Transparent Media(P. 146)
). When