Resetting The Level Of The Sensor For Reading Crop Marks - Roland TrueVIS VG2-640 User Manual

Accurately Adjusting the Settings for Cutting with Crop Marks

Resetting the Level of the Sensor for Reading Crop Marks

When the sensor for reading crop marks is corrected, the correction value is stored. When using another media,
reset the level of the sensor for reading crop marks to initial settings, as the correction value may not match.
Procedure
1.
Press [MENU].
2.
Press [▲] to display the screen shown below.
MENU
CUTTING MENU
3.
Press [▶] once, and then press [▼] twice to display the screen shown below.
CUTTING MENU
CROPSENS CALIB.
4.
Press [▶], then [▼] to display the screen shown below.
CROPSENS CALIB
SENS LEVEL
5.
Press [▶], then [▼] to display the screen shown below.
SENS LEVEL
RESET
6.
Press [ENTER] to confirm your entry.
7.
Press [MENU] to go back to the original screen.
188
1. Optimizing the Output Quality