Roland TrueVIS VG2-640 User Manual page 35

Setup of Media
3.
Pass the leading edge of the media between the pinch rollers (
4.
Lower the loading lever (rear).
The media is held in place.
At this time, the message "PRESS ENTER KEY TO SETUP" is displayed on the screen, but do not press the
[ENTER] yet, and proceed to the next step.
5.
(Move to the front of the printer.) Gently hold down the media and raise the loading lever (front).
The media is released.
6.
Pull out the media over the apron.
34
2. Basic Operations
) and the grit rollers ( ).