Replacing The Separating Knife - Roland VersaUV LEC-300A User Manual

4-5 Replacing Consumable Parts
3.
Quit the blade replacement mode.

MAINTENANCE
REPLACE KNIFE

W 736mm
SETUP SHEET
ROLL

Replacing the Separating Knife

If the separating knife becomes dull, replace it with the included replacement knife.
CAUTION
CAUTION
1.
Enter the blade replacement mode.

MENU
SUB MENU

SUB MENU
MAINTENANCE

MAINTENANCE
REPLACE KNIFE

NOW PROCESSING..
OPEN FRONT

FINISHED?
82
Chapter 4 Maintenance and Adjustment
Close the front cover.
Press
Press
Press
Be sure to perform operations as specified by these instructions,
and never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Never touch the tip of the separating knife with your fingers.
Doing so may result in injury.
Press
Press
Press
Press
Press
Press
Press
The cutting carriage moves to a location where blade replace-
ment is possible, and then the screen shown in the figure
appears.
COVER
Open the front cover.
Preparations are complete when this screen appears.
.
.
to go back to the original screen.
.
several times.
.
.
.
several times.
.