DRIVEABILITY - GAS
*CHECKING RADIATOR FAN OPERATION WITH NO DTC'S —
TEST
6
Turn the ignition off.
Disconnect the Radiator Fan Motor harness connector.
Remove Radiator Fan Relays.
Measure the resistance of the Radiator Fan Relay Output circuit from each relay to
the Radiator Fan Motor harness connector.
Is the resistance below 5.0 ohms for both the High and Low Speed Radiator Fan
Relay Output circuits?
Yes → Go To 7
→ Repair the Radiator Fan Relay Output circuit(s) for an open.
No
7
If there are no possible causes remaining, view repair.
Repair
ACTION
Perform POWERTRAIN VERIFICATION TEST VER - 2.
Replace the Radiator Fan Relay.
Perform POWERTRAIN VERIFICATION TEST VER - 2.
204
Continued
APPLICABILITY
All
All