Chrysler PT Cruiser 2001 Service Manual Supplement page 2514

DRIVEABILITY - GAS
P0108-MAP SENSOR VOLTS TOO HIGH —
TEST
9 Start the engine.
With the DRB, read the MAP Sensor voltage.
Wiggle MAP Sensor Connector & Harness.
Monitor the DRB display.
Was there any MAP Sensor voltage change?
Yes → Repair the Harness or Connector that caused the voltage change.
→ Test Complete.
No
ACTION
Perform POWERTRAIN VERIFICATION TEST VER - 5.
Continued
54
APPLICABILITY
All