Chrysler PT Cruiser 2001 Service Manual Supplement page 2434

23 - 2 DOOR - FRONT
INSIDE HANDLE ACTUATOR (Continued)
INSTALLATION
NOTE: Clean the excess heat staking off of the
studs to aid installation.
(1) Install the new inside door handle, install the
screws and hand tighten (Fig. 2).
(2) If necessary renew the upper heat stake. Refer
to page 23-28 for heat staking procedure (Fig. 2).
(3) Install the remote handle/power door lock
switch bezel.
(4) Install the door trim panel.
Fig. 2 Front Door Inside Handle Actuator
1 - HEAT STAKE LOCATION
2 - INSIDE HANDLE ACTUATOR
3 - PHILLIPS TYPE SCREWS
2001 PT CRUISER
PT