Chrysler PT Cruiser 2001 Service Manual Supplement page 2627

P1389-NO ASD RELAY OUTPUT VOLTAGE AT PCM —
TEST
9 At this time, the conditions required to set the DTC are not present.
Note: Visually inspect the related wiring harness. Look for any chafed,
pierced, pinched, or partially broken wires.
Note: Visually inspect the related wire harness connectors. Look for broken,
bent, pushed out, or corroded terminals.
Note: Refer to any technical service bulletins that may apply.
Perform a wiggle test on the related wiring harnesses with the engine running.
Watch for the Good Trip Counter to change to 0.
Were any problems found?
Yes → Repair wiring harness/connectors as necessary.
→ Test Complete.
No
ACTION
Perform POWERTRAIN VERIFICATION TEST VER - 2.
DRIVEABILITY - GAS
167
Continued
APPLICABILITY
All