Chrysler PT Cruiser 2001 Service Manual Supplement page 2420

19 - 4 PUMP
HOSES (Continued)
(3) Remove the hood-opening weather-strip from
across the radiator closure panel.
(4) Remove the ambient temperature sensor from
the radiator closure panel (Fig. 4).
Fig. 4 Ambient Temperature Sensor
1 - FASTENER
2 - SENSOR
(5) Remove the fasteners securing the radiator clo-
sure panel in place (Fig. 5), then remove the panel.
Fig. 5 Radiator Closure Panel
1 - FASTENERS
(6) Remove the clamp securing the supply hose to
the power steering pump supply fitting (Fig. 6), then
remove the hose from the supply fitting.
(7) Remove the hose clamp securing the supply
hose to the power steering fluid reservoir (Fig. 7).
Slide the hose off the end of the reservoir fitting and
remove from vehicle.
2001 PT CRUISER
1 - SUPPLY HOSE CLAMP
2 - POWER STEERING PUMP
3 - FWD
Fig. 7 Hose Connection At Reservoir
1 - POWER STEERING FLUID RESERVOIR
2 - ENGINE COVER
3 - SUPPLY HOSE
4 - RETURN HOSE
INSTALLATION - POWER STEERING FLUID
RETURN HOSE
NOTE: Before proceeding with this procedure,
review WARNINGS AND CAUTIONS.
(1) Slide a hose clamp onto the power steering
fluid reservoir end of the hose far enough to clear the
molded fitting on the reservoir once the hose is
installed.
Fig. 6 Supply Hose At Pump
PT