1. Remove the presilencer. (See EXHAUST SYSTEM REMOVAL/INSTALLATION [MZI-3.7] .)
2. Remove the presilencer insulator.
3. Remove the propeller shaft. (See PROPELLER SHAFT REMOVAL/INSTALLATION .)
4. Remove the rear ABS wheel-speed sensor. (See REAR ABS WHEEL-SPEED SENSOR
REMOVAL/INSTALLATION [AWD] .)
5. Remove the rear coil spring. (See REAR COIL SPRING REMOVAL/INSTALLATION.)
6. Remove in the order indicated in the table.
7. Install in the reverse order of removal.
Fig. 31: Identifying Presilencer Insulator, Presilencer & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 SUSPENSION Rear Suspension - Mazda CX-9