Table of Contents
Advertisement
Verifying the profile settings and configuration
Verifying the profile settings
Figure Simulation button in the VWorks window
AssayMAP Bravo Platform Installation Guide
Ensure that you complete the following workflow for all device profiles in the
Protein Sample Prep Workbench.
Step
For this task...
1
Verify the device file
references the correct profile
and the profile settings are
correct.
2
Ensure the deck configuration
in the profile matches the
physical AssayMAP Bravo
deck.
After you ensure that all profiles in the Protein Sample Prep Workbench have
been installed and that they are configured correctly, you set the teachpoints
for each of the profiles.
IMPORTANT
Ensure that the Protein Sample Prep Workbench is closed.
To verify the profile settings:
1
Start the VWorks software.
You can click the VWorks desktop icon or use the Start menu on the
Windows desktop to start the VWorks software.
2
Ensure that Simulation is off.
3
In the VWorks window, open the corresponding AssayMAP device file for
the profile that you are verifying.
To open a device file, choose File > Open. In the Open dialog box, ensure the
file type is Device Files (*.dev), select the file, and then click Open.
The device files are installed in the following default location:
C:\VWorks Workspace\Workbench\Device Files
4
Click No when the Would you like to initialize devices now? message appears.
Setting up the computer and software
Verifying the profile settings and configuration
See...
"Verifying the profile settings" on
page 39
"About verifying the deck
configuration in the profile" on
page 43
39
Advertisement
Table of Contents
