Agilent Technologies AssayMAP Bravo Installation Manual page 42

Setting up the computer and software
Setting up the computer and installing the software
34
Figure Local Area Connection Properties dialog box
Note: The name of the Ethernet adapter can vary depending on the
computer model.
5
In the Internet Protocol Version 4 (TCP/IPv4) dialog box:
a
Select Use the following IP address.
b
In the IP address boxes, type the following:
192.168.0.1.
IMPORTANT
The specified static IP address is required for the
connection.
c
Press the TAB key. The subnet mask populates automatically to display
the following:
AssayMAP Bravo Platform Installation Guide