Agilent Technologies AssayMAP Bravo Installation Manual page 64

Setting up the computer and software
Testing the accessories
Testing the Orbital Shaking Station
56
To test the Orbital Shaking Station:
1
In the Accessory Configuration area, click the Orbital Shaking Station icon, and
then click Diagnose accessory. The Bravo Accessory Diagnostics dialog box
opens.
2
Type the RPM, select the Stir direction, and then click Start.
3
At the Orbital Shaking Station on the deck, verify that the accessory
operates correctly.
4
In the Bravo Accessory Diagnostics dialog box, click Stop, and then click OK.
IMPORTANT
Ensure that you verify the profile settings and test the
accessories in each of the other profiles before you set the teachpoints.
AssayMAP Bravo Platform Installation Guide