Agilent Technologies AssayMAP Bravo Installation Manual page 31

AssayMAP Bravo Platform Installation Guide
3
Uninstall the plastic interface from the top of the Peltier Thermal Station
by removing the four screws located at the four corners.
Figure Plastic interface on the top of the Peltier Thermal Station assembly
Figure Peltier Thermal Station assembly with plastic interface removed
4
Perform the following steps to place the Peltier Thermal Station assembly
into the cutout hole, and then position the bracket:
Figure Bracket, Peltier Thermal Station assembly, and deck cutout
a
Carefully slide the cable into the cutout hole first before you place the
Peltier Thermal Station assembly into the cutout.
Installing the platform
Installing the Peltier Thermal Station
23