Agilent Technologies AssayMAP Bravo Installation Manual page 72

Setting the teachpoints
Teaching part 2: Adjusting teachpoints for accessories
64
Note: Additional accessories will appear in the image if you have
configured them in this profile.
3
In the Location list, locate the Z-axis box. Write down the Z- axis value on a
piece of paper. You will use this value in a subsequent step.
Note: The Z- axis teachpoint value for deck location 1 is typically
between 105.2–105.8 mm for a standard height AssayMAP Bravo Platform
and standard platepad.
4
In the Approach height above teachpoint box, type 50, and then click Approach.
AssayMAP Bravo Platform Installation Guide