Table of Contents
Advertisement
Before you start
About this guide
About this guide
Intent
What this guide covers
What is new in this revision
Related guides and where to find them
Checklists
2
This installation guide is intended for use by qualified and authorized Agilent
Technologies service personnel who possess an in- depth service background
and have received training in the installation of the AssayMAP Bravo Platform.
This guide describes the following software versions:
•
Protein Sample Prep Workbench v3.0
•
VWorks Automation Control v13.1.1
•
Bravo Diagnostics v19.1.1
and
Feature and description
Revised the startup procedure to match
instructions in the Protein Sample Prep
Workbench v3.0.
Reorganized the workflow for testing the
safety equipment.
Revised the syringe wash procedure to
specify 60 wash cycles.
You can find the following checklists on the Agilent AssayMAP Bravo Platform
product page at
https://www.agilent.com/en/products/automation- solutions/
protein- sample- preparation/assaymap- bravo- platform
•
Site Preparation
Checklist. Specifies the site requirements that must be
met before installing the AssayMAP Bravo Platform.
•
Installation
Checklist. Lists the tasks to be performed to install the
AssayMAP Bravo Platform.
See...
"Running the Startup utility" on
page 83
"Testing the safety equipment" on
page 84
"Washing the syringes to prepare
for first time use" on page 86
AssayMAP Bravo Platform Installation Guide
Advertisement
Table of Contents
