Table of Contents
Advertisement
Setting up the computer and software
Setting up the computer and installing the software
Setting up the computer and installing the software
Setting up the computer
Turning on the instrument
Setting up the computer LAN
32
For computer requirements, see the software release notes.
If the Agilent- supplied computer is being set up for the first time, you must
set up the Microsoft Windows operating system.
To set up a new Agilent-supplied computer:
1
Turn on the computer and monitor. An automated setup procedure runs to
prepare the computer.
2
When the Set Up Windows wizard opens, enter the requested information in
each screen based on the customer's preferences.
3
Ensure that Microsoft Excel 2016 or later version is installed.
Note: Microsoft Excel is required for the Protein Sample Prep Workbench
calculators. Agilent Technologies does not supply Microsoft Excel.
To turn on the AssayMAP Bravo Platform:
1
Ensure that the Bravo Platform is connected according to the instructions
in the
Bravo Platform Safety and Installation
2
To turn on the Bravo instrument, press the power switch to the on (|)
position.
The green light on the switch is illuminated when the Bravo Platform is
on.
WARNING
Connecting the Bravo Platform to a company or general network can
potentially cause injury. Remote computer operators might accidentally initiate an
operation that causes the robot to move unexpectedly, possibly injuring nearby lab
personnel. Avoid connecting the Bravo Platform to a company or general network. Ensure
that anyone with access to the Bravo Platform is trained in the potential hazards and how
to avoid them.
Guide.
AssayMAP Bravo Platform Installation Guide
Advertisement
Table of Contents
