Agilent Technologies AssayMAP Bravo Installation Manual page 41

AssayMAP Bravo Platform Installation Guide
IMPORTANT
Verify the LAN connection to the instrument before connecting
to any other networks. If the computer will be connected to the house LAN,
make sure the computer has a second network adapter. The second network
adapter can have a dynamic IP address.
To set up the computer LAN:
1
From the Windows desktop, go to Control Panel > Network and Sharing Center.
2
In the Network and Sharing Center window, locate and click Sub Network or
Local Area Connection, as applicable.
Note: Depending on the setup, the name of the network can vary, for
example, instead of Sub Network, it might be Local Area Connection.
3
In the Sub Network Status or Local Area Connection Status dialog box that opens,
click Properties.
4
In the Properties dialog box, do the following:
a
Clear the check box of Internet Protocol Version 6 (TCP/IPv6).
b
Select Internet Protocol Version 4 (TCP/IPv4).
c
Click Properties.
Setting up the computer and software
Setting up the computer and installing the software
33