Table of Contents
Advertisement
Safety Practices and Hazards
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
Operation of an atomic absorption spectrometer can involve the use
of compressed gases, flames, and hazardous materials including
corrosive fluids and flammable liquids. Unskilled, improper, or
careless use of this instrument can create explosion hazards, fire
hazards, or other hazards which can cause death, serious injury to
personnel, or severe damage to equipment and property.
Information on safety practices is provided with your instrument and
operation manuals, and also referenced in your Agilent accessory
manuals. Before using your instrument or accessories, you must
thoroughly read these safety practices.
Observe all relevant safety practices at all times.
Verifying Safe State
The following general safety precautions must be observed during all
phases of operation, maintenance and service of this instrument.
To ensure continued safety of the instrument after maintenance or
service procedures verify the instrument is returned to a safe state
for the user. This includes running performance checks to verify the
instruments safety systems are functioning correctly. Check the
general condition of the instrument during operation for wear or
signs of corrosion that are likely to inhibit function or safety.
Failure to comply with these precautions or with specific warnings
elsewhere in this manual violates safety standards of design,
manufacture, and intended use of the instrument. Agilent
Technologies assumes no liability for the customer's failure to
comply with these requirements.
Electrical Hazards
The instrument and accessories contain electrical circuits, devices
and components operating at dangerous voltages. Contact with these
circuits, devices and components can cause death, serious injury, or
painful electric shock.
12
Agilent 55B AA Spectrometer User's Guide
Advertisement
Table of Contents
