Safety Precautions - Omron R88M-K Series User Manual

Safety Precautions

Safety Precautions
To ensure that the OMNUC G5-series Servomotor and Servo Drive as well as peripheral equipment are used
safely and correctly, be sure to read this Safety Precautions section and the main text before using the product
in order to learn items you should know regarding the equipment as well as required safety information and
precautions.
Make an arrangement so that this manual also gets to the end user of this product.
After reading this manual, keep it in a convenient place so that it can be referenced at any time.
Explanation of Display
The precautions explained in this section describe important information regarding safety and must be followed
without fail.
The display of precautions in this manual and their meanings are explained below.
DANGER
Caution
Even those items denoted by the caution symbol may lead to a serious outcome depending on
the situation. Accordingly, be sure to observe all safety precautions.
Precautions for Safe Use
Indicates precautions on what to do and what not to do to ensure using the product safely.
Precautions for Correct Use
Indicates precautions on what to do and what not to do to ensure proper operation and
performance.
Reference
Indicates an item that helps deepen your understanding of the product or other useful tip.
Explanation of Symbols
Example of symbols
6
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. Additionally,
there may be severe property damage.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury, or
property damage.
This symbol indicates danger and caution.
The specific instruction is described using an illustration or text inside or near
The symbol shown to the left indicates "beware of electric shock".
This symbol indicates a prohibited item (item you must not do).
The specific instruction is described using an illustration or text inside or near
The symbol shown to the left indicates "disassembly prohibited".
This symbol indicates a compulsory item (item that must be done).
The specific instruction is described using an illustration or text inside or near
The symbol shown to the left indicates "grounding required".
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
.
.
.