Omron R88M-K Series User Manual page 232

3-4 Cable and Connector Specifications
Specified Cables for Position Control Unit (for CJ1W-NC@@4 - High-speed Type)
This cable is for connecting Position Control Units (CJ1W-NC@@4) for OMRON
Programmable Controller SYSMAC CJ Series. Cables are available for either 1 axis or 2 axes.
The following types of Position Control Units are supported.
CJ1W-NC214/-NC414/-NC234/-NC434
Cable types
 Cable for line-driver output for 1 axis
XW2Z-100J-G9
XW2Z-500J-G9
XW2Z-10MJ-G9
3
 Cable for open collector output for 1 axis
XW2Z-100J-G13
XW2Z-300J-G13
 Cable for line-driver output for 2 axes
XW2Z-100J-G1
XW2Z-500J-G1
XW2Z-10MJ-G1
 Cable for open collector output for 2 axes
XW2Z-100J-G5
XW2Z-300J-G5
Connection configuration and external dimensions
 Cables for 1 axis
Position Control
Unit side
CJ1W-NC@@4
 Cables for 2 axes
Position Control
Unit side
CJ1W-NC@@4
3-115
Model Length
1 m
5 m
10 m
Model Length
1 m
3 m
Model Length
1 m
5 m
10 m
Model Length
1 m
3 m
16.1
t = 6.1
16.1
t = 6.1
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
L 39
t = 18
L 39
t=18
t = 18
Servo Drive side
R88D-K@
Servo Drive side
R88D-K@
Servo Drive side
R88D-K@