Omron R88M-K Series User Manual page 532

9-4 Setting the Mode
 The absolute encoder reset function can be used only with systems that use an absolute encoder.
Parameter Initialization
This initializes the parameters.
1. Execute the initialization of the parameter.
operation
2. Returning to Auxiliary Function Mode display
9
operation
 If Alarm No. 11 (power supply undervoltage), 36 (parameter error) or 37 (parameter destruction)
is displayed, the parameter cannot be initialized.
Front Panel Lock
This locks the front panel.
1. Displaying Parameter Mode
operation
9-29
Precautions for Correct Use
Key
Display example
Key
Display example
Precautions for Correct Use
Key
Display example
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
Explanation
Press the key to enter Parameter Initialization Mode.
Press and hold the key for 5 seconds or longer until
is displayed.
The bar indicator will increase.
The initialization of the parameter will start.
This indicates a normal completion.
will be displayed if the parameter could not be
initialized. Turn OFF the drive power supply and then execute
again.
Explanation
Press the key to return to Auxiliary Function Mode.
Explanation
Press the key to display Monitor Mode.
Press key to display Parameter Setting Mode.