Analog Input Value
Input signal Input voltage (V)
Press
Note. Voltages exceeding +/−10 V are not displayed accurately.
Alarm Factor, History
...Present alarm
...History 0 (latest history)
...History 13 (oldest history)
Up to the most recent 14 alarms, including the current one, can be viewed in the reason of error.
The display area will flash when an alarm occurs.
If an alarm that is recorded in the history occurs, the alarm code for the current alarm and for
history 0 will be the same.
"st" will flash on the display if a safety input error (alarm 30.0) occurs.
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
to select the signal you want to monitor.
Analog input value 1 (V)
The value after offset compensation is displayed.
Analog input value 2 (V)
Analog input value 3 (V)
Alarm code
(
if no alarm is present)
9-4 Setting the Mode
9-12
9