Using The Front Display - Omron R88M-K Series User Manual

9-3 Using the Front Display

OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
9-3 Using the Front Display
LED display (6 digits)
All LEDs will flash when an alarm occurs and
the window switches to the alarm display.
Mode key
Switches between the following 4 modes.
• Monitor Mode
• Parameter Setting Mode
• Auxiliary Function mode
• Parameter Write mode
Increment and Decrement key
Increases/decreases the parameter number or data value.
Shift key
Shifts the operating digit to the left.
Data key
Switches between the parameter and data displays,
and writes data.
9
9-6