1-6 Unit Versions
The G5-series Servo Drive uses unit versions.
Unit versions are used to manage differences in supported functions when product upgrades
are made.
Confirmation Method
The unit version of a G5-series Servo Drive is given on the product's nameplate as shown
below.
Nameplate
location
(R88D-KTA5L)
Unit Versions
Unit version
Not indicated
Ver.1.1
Ver.1.2
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
Product Nameplate
Upgraded content
New release
Alarm 27.2 detection conditions have been
changed to support the increase of encoder
resolution in the G series.
European area compliance
No changes to existing Ver. 1.1 functions
1-6 Unit Versions
Unit Version
Here, the unit version is 1.2.
Supported
CX-Drive versions
Ver. 1.80 or higher
Ver. 1.80 or higher
Ver. 1.80 or higher
1-18
1