Idle Speed Control System; Structural View; Idling Knob, Idling Cable - Ford TRADER Workshop Manual

IDLE SPEED CONTROL SYSTEM
F2
IDLE SPEED CONTROL SYSTEM
STRUCTURAL VIEW
®
9TGOF2·116
1 . Idling knob
2. Idling cable
Removal/Installation ................ page F2-44
Adjustment.. .............................. page F2-43
Removal/Installation ................ page F2-44
IDLING KNOB, IDLING CABLE
Adjustment
1. Verify that the control lever of the injection pump is at the
idle position when the idling knob is not turned .
. 2. Verify that the idle speed increases when the knob is turned
clockwise.
3. Check the free play of the cable when the idling knob is
not turned.
Free play: 0-5mm (0-0.2 in)
4. If not specified, loosen the locknuts and adjust the free play.
Tightening torque:
9.8-15
N-m
(100-150
em-kg,
87-130
in-Ib)
F2-43