Back Window And Weatherstrip - Ford TRADER Workshop Manual

Truck
Table of Contents

Advertisement

.lk··
y
;*.:14:1------____ _
...
---.......
I
,
.
,
..
-
......
l
!
9TGOSX·063
BACK WINDOW
s
Removal note
Back window and weatherstrip
1. Pry the weatherstrip outward from within the cabin with SST .
2. Remove the back window together with the weatherstrip.
Installation note
Back window and weatherstrip
1 . Remove the sealant from the body surface.
2. Fit the weatherstrip onto the back window.
3. Insert heavy string around the weatherstrip.
4. Apply soapy water to ensure smooth installation between
the weatherstrip and the body.
5. Locate the glass and weatherstrip squarely in the window
frame.
Note
• The following operation must
be'
done
by
the
partner.
6. Tap lightly on the outside of the back window while pulling
the string to install the weatherstrip around the entire cir-
cumference.
7. Move the glass by hands on the inside and the outside of
the, glass if it is not properly seated.
8. Protect the body around the window flame with'masking
tape.
9.
RII with
sealant between the weatherstrip and body and be-
tween the weatherstrip and glass around the entire circum-
ference.
5-39

Advertisement

Table of Contents
loading

Table of Contents