GI
9MUGIX·022
9MUGIX·023
9MUGIX·024
9MUGlX-025
03UGIX-oll
GI-12
CAUTION
CAUTION WITH ELECTRICAL PARTS
Battery Cable
Before disconnecting connectors or replacing electrical parts,
disconnect the negative battery cable.
Connectors
Removal of connector
Never pull on the wiring harness when disconnecting con-
nectors.
Connectors can be removed by pressing or pulling the lock
le~er
as shown.
._-
Locking of connector
When locking connectors, make sure to listen for a click that
will indicate they are securely ·Iocked.
Inspection
1. When a tester is used to check for continuity or to measure
voltage, insert the tester probe from the wire harness side.