Checking Injection Nozzle - Ford TRADER Workshop Manual

9TGDF1·D54
Jt
-i--
.r-
L - - - -
iq --
I .'
1""'\
9TGDF1·055
FUEL SYSTEM
F1
Checking Injection Nozzle
1. Verify that the seat of the pressure pin and other parts are
free of damage.
2. Verify that the nozzle body is not damaged.
Hold the nozzle body upright and insert the needle valve
approximately two-thirds of the way into the body. Verify
that the needle valve drops into the body under its own
weight when released.
Assembly
1 . Assemble in the reverse order of disassembly.
Tightening torque:
78-98 N·m (8.0-10.0 m-kg, 58-72 ft-Ib)
2. Retest the nozzle after assembly.
Installation
Caution
• Do not reuse the copper washers. .
• Tighten the nozzle into the cylinder head to the
specified torque.
1 . Install in the reverse order of removal.
Tightening torque:
59-69 N-m (6.0-7.0 m-kg, 43-51 ft-Ib)
2. Run the engine and check for fuel leakage.
9TGDF1·D56
F1-21